Editing
SGI Rackable Systems - C1002
Jump to navigation
Jump to search
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
http://www.0wn4ge.co.uk/?page=rak http://forums.multiplay.co.uk/hardware/73855-rackable-systems-management-card-thing == Files == [[Media:RoamerSerialUsersManual_1.0.pdf]] [[Media:Phantom4Manual_2004-04-27_rc1.pdf]] ==Roamer-KVM Quick Start== * User: admin * Password: rackable By default, the Roamer KVM module will try to contact a DHCP server in the subnet to which it is physically connected. If a DHCP server is found, it may provide a valid IP address, gateway address and net mask. Before you connect the device to your local subnet, be sure to complete the corresponding configuration of your DHCP server. We recommend you configure a fixed IP assignment to the MAC address of the Roamer KVM module. You can find the MAC address on the outside of the shipping box, and labeled on the bottom side. # Plug the far right port (the roamer port ) into a network that assigns DHCP addresses # Watch your DHCP logs/leases ( the mac may start with 00-20-4A ) # telnet to port 9999 # configure from there ... more to come === Configure Network === * telnet <your roamer ip> 9999 <source> ... Change Setup: 0 Server 1 Channel 1 3 E-mail 5 Expert 6 Security 7 Defaults 8 Exit without save 9 Save and exit Your choice ? 0 # Enter 0 # Enter your IP address.. it will look weird as you enter dots IP Address : (000) 10.(000) 69.(005) 1.(000) Set Gateway IP Address (N) ? N Netmask: Number of Bits for Host Part (0=default) (0) Change telnet config password (N) ? N Change Setup: 0 Server 1 Channel 1 3 E-mail 5 Expert 6 Security 7 Defaults 8 Exit without save 9 Save and exit Your choice ? 0 IP Address : (010) 10.(000) 0.(000) 1.(000) 96 Set Gateway IP Address (N) ? Y Gateway IP addr (000) 10.(000) 0.(000) 1.(000) 1 Netmask: Number of Bits for Host Part (0=default) (0) 24 Change telnet config password (N) ? N Change Setup: 0 Server 1 Channel 1 3 E-mail 5 Expert 6 Security 7 Defaults 8 Exit without save 9 Save and exit Your choice ? 9 Parameters stored ... Connection closed by foreign host. </source> == Access the Roamer (non config) == * Figure out what tenet port you have configured : to do so, telnet to the raomer config port (9999) and look for channel 1 config. : in our case, it's port '''10001''' <source> telnet <roamer ip> 9999 Trying ... Connected to .... Escape character is '^]'. ... *** Channel 1 Baudrate 9600, I/F Mode 4C, Flow 00 Port 10001 ... </source> * Now that you have the port, telnet to it * When connected, enter keys sequence '''Ctrl-6''' (hyperterm '''Ctrl-Shift-6''') <source> telnet 10.0.1.96 10001 Trying 10.0.1.96... Connected to 10.0.1.96. Escape character is '^]'. Roamer [? for Help]: Server is on </source> <source> +---------------------------------------------+ | Rackable Systems Roamer v4.6.0 (c) 2005 | | | | A - Change baud rate | | D - Enter a new power on delay | | G - Get all state variables | | I - Power sense: Other | | J - Enter scratchpad message | | K - View scratchpad | | N - Local OS access: Yes | | O - Copy scratchpad to saved LCD area | | P - Turn the server Off | | R - Reset the server | | X - Reset the Roamer | | Y - Change the password | | 1 - Change red LED state (Off) | | 2 - Change green LED state (On) | | 3 - Change blue LED state (Off) | | . - Administrative menu | | ESC - Quit | | | | Choose a command | +---------------------------------------------+ </source> * go crazy [[Category:How-to]]
Summary:
Please note that all contributions to RARForge may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see
RARForge:Copyrights
for details).
Do not submit copyrighted work without permission!
Cancel
Editing help
(opens in new window)
Navigation menu
Personal tools
Not logged in
Talk
Contributions
Log in
Namespaces
Page
Discussion
English
Views
Read
Edit
View history
More
Search
Navigation
Home
All Pages
All Files
View Categories
Recent changes
Random page
Edit this menu
Tools
What links here
Related changes
Special pages
Page information