SGI Rackable Systems - C1002

From RARFORGE
Jump to: navigation, search

http://www.0wn4ge.co.uk/?page=rak

http://forums.multiplay.co.uk/hardware/73855-rackable-systems-management-card-thing

Contents

Files

Media:RoamerSerialUsersManual_1.0.pdf

Media:Phantom4Manual_2004-04-27_rc1.pdf


Roamer-KVM Quick Start

  • User: admin
  • Password: rackable

By default, the Roamer KVM module will try to contact a DHCP server in the subnet to which it is physically connected. If a DHCP server is found, it may provide a valid IP address, gateway address and net mask. Before you connect the device to your local subnet, be sure to complete the corresponding configuration of your DHCP server. We recommend you configure a fixed IP assignment to the MAC address of the Roamer KVM module. You can find the MAC address on the outside of the shipping box, and labeled on the bottom side.

  1. Plug the far right port (the roamer port ) into a network that assigns DHCP addresses
  2. Watch your DHCP logs/leases ( the mac may start with 00-20-4A )
  3. telnet to port 9999
  4. configure from there

... more to come

Configure Network

  • telnet <your roamer ip> 9999
...
Change Setup:
  0 Server
  1 Channel 1
  3 E-mail
  5 Expert
  6 Security
  7 Defaults
  8 Exit without save
  9 Save and exit            Your choice ? 0
 
# Enter 0
 
# Enter your IP address.. it will look weird as you enter dots
IP Address : (000) 10.(000) 69.(005) 1.(000)    
Set Gateway IP Address (N) ? N
Netmask: Number of Bits for Host Part (0=default) (0) 
Change telnet config password (N) ? N
 
 
Change Setup:
  0 Server
  1 Channel 1
  3 E-mail
  5 Expert
  6 Security
  7 Defaults
  8 Exit without save
  9 Save and exit            Your choice ? 0
 
IP Address : (010) 10.(000) 0.(000) 1.(000) 96
Set Gateway IP Address (N) ? Y
Gateway IP addr (000) 10.(000) 0.(000) 1.(000) 1
Netmask: Number of Bits for Host Part (0=default) (0) 24
Change telnet config password (N) ? N
 
 
Change Setup:
  0 Server
  1 Channel 1
  3 E-mail
  5 Expert
  6 Security
  7 Defaults
  8 Exit without save
  9 Save and exit            Your choice ? 9
 
Parameters stored ...
Connection closed by foreign host.

Access the Roamer (non config)

  • Figure out what tenet port you have configured
to do so, telnet to the raomer config port (9999) and look for channel 1 config.
in our case, it's port 10001
telnet <roamer ip> 9999
Trying ...
Connected to ....
Escape character is '^]'.
 
...
 
*** Channel 1
Baudrate 9600, I/F Mode 4C, Flow 00
Port 10001
...


  • Now that you have the port, telnet to it
  • When connected, enter keys sequence Ctrl-6 (hyperterm Ctrl-Shift-6)
telnet 10.0.1.96 10001
Trying 10.0.1.96...
Connected to 10.0.1.96.
Escape character is '^]'.
Roamer [? for Help]:
Server is on
+---------------------------------------------+
|   Rackable Systems Roamer v4.6.0  (c) 2005  |
|                                             |
| A - Change baud rate                        |
| D - Enter a new power on delay              |
| G - Get all state variables                 |
| I - Power sense: Other                      |
| J - Enter scratchpad message                |
| K - View scratchpad                         |
| N - Local OS access: Yes                    |
| O - Copy scratchpad to saved LCD area       |
| P - Turn the server Off                     |
| R - Reset the server                        |
| X - Reset the Roamer                        |
| Y - Change the password                     |
| 1 - Change red LED state (Off)              |
| 2 - Change green LED state (On)             |
| 3 - Change blue LED state (Off)             |
| . - Administrative menu                     |
| ESC - Quit                                  |
|                                             |
| Choose a command                            |
+---------------------------------------------+


  • go crazy
Personal tools
Namespaces

Variants
Views
Actions
Navigation
Toolbox