AT9924t

From RARFORGE
Jump to: navigation, search

Contents

commands

HELP

  • my help was not set - luckily there was a .hlp file under 'show files' so I set it..
show file
 
Filename              Device        Size     Created               Locks
-------------------------------------------------------------------------
89-266.rez              flash         4179688  13-Apr-2010 16:13:00    0
89-266a.hlp             flash         148723   13-Apr-2010 16:14:45    0
# set HELP
set help=89-266a.hlp
help
 
        AT-9900 Series Switches          HELP v2.6.6 Rev A, 08-Nov-2004
 
 
  Help is available on the following topics:
 
    HELP APPLETALK            Appletalk commands
    HELP ASYNCHRONOUS         Async ports, TTY
    HELP BGP                  BGP version 4 routing protocol commands
    HELP BOOTP                BootP relay commands
    HELP DHCP                 DHCP server commands
    HELP DHCP6                DHCP6 commands
    HELP DVMRP                Distance Vector Multicast Routing commands
  ...

IP Config - Route

enable ip
add ip int=vlan1209 ip=10.69.1.249 mask=255.255.255.0
set ip int=vlan1209 mul=on
add ip rou=0.0.0.0 mask=0.0.0.0 int=vlan1209 next=10.69.1.1

Save Config

create conf=config.cfg
# to set the config for boot, this only needs to be done once. 
set conf=config.cfg
# I created an alias, to save the config easier
add alias="write" string="create con=config.cfg"
# now we just type 'write to save the config'
write

VLANs

Creating

create vlan="external" vid=1208
create vlan="private" vid=1209
create vlan="drbd" vid=1300

Adding to Ports

add vlan="1300" port=21-24
add vlan="1209" port=9-11 frame=tagged

SNMP

enable snmp
create snmp community=<private> access=write open=on
add snmp community=<private> traphost=10.69.1.9

NTP

enable ntp
set ntp utc=-07:00:00
add ntp peer=<ip of NTP server>
Personal tools
Namespaces

Variants
Views
Actions
Navigation
Toolbox